The Machining & Welding 5 FT - 10 FT Low Hr Adj Length is built for lifts where headroom is tight and load length varies. It adjusts across a 5 to 10 foot range and carries a 2,000 pound working load limit.

This beam is a good fit for maintenance and fabrication work where load sizes change from job to job but hook height above the floor stays limited.

Adjustment holes are spaced along the beam so you can lock in the exact length needed for the load, with a locking pin holding the setting under load.

A low headroom, adjustable length beam gives you the flexibility of several fixed-length beams in a single piece of equipment.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

The Machining & Welding 5 FT - 10 FT Low Hr Adj Length keeps your options open on both load length and overhead clearance, in a single piece of equipment.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Adjustable Length Range: 5 ft to 10 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 255 lbs