The Machining & Welding 3 FT - 5 FT Low Hr Adj Length is a low headroom lift beam that telescopes or pins out between 3 and 5 feet, giving you a 2,000 pound working load limit across a range of load lengths.

This beam is a good fit for maintenance and fabrication work where load sizes change from job to job but hook height above the floor stays limited.

The steel construction is engineered to hold the full working load limit at any length setting within the adjustable range, not only when fully extended or retracted.

Adjustability reduces the rigging inventory you need to keep on hand, since one beam covers a range of load lengths instead of just one.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

Order the Machining & Welding 3 FT - 5 FT Low Hr Adj Length for a beam that adjusts to the load instead of asking the load to fit the beam.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Adjustable Length Range: 3 ft to 5 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 140 lbs