The Machining & Welding 10 FT - 15 FT Low Hr Adj Length is a low headroom lift beam that telescopes or pins out between 10 and 15 feet, giving you a 2,000 pound working load limit across a range of load lengths.

This design suits facilities with low overhead clearance, such as buildings with low bar joists or crane hooks that sit close to the load, where a standard fixed beam would eat into your usable lift height.

A low profile steel body keeps the beam thickness minimal, preserving as much usable hook height as possible in low clearance areas.

In buildings where crane hook travel is already limited, every inch of headroom the beam saves is an inch you get back in usable lift height.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding 10 FT - 15 FT Low Hr Adj Length to your rigging inventory and stop turning away lifts that do not fit a fixed-length beam.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Adjustable Length Range: 10 ft to 15 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 578 lbs