For loads that do not fit a fixed-length beam, the Machining & Welding 10 FT - 15 FT Low Hr Adj Length adjusts from 10 to 15 feet while keeping a low profile, all within a 60,000 pound rating.

Riggers commonly use this style of beam for spreading sling angles on long or awkward loads while keeping the total headroom used by the rigging as small as possible.

Adjustment holes are spaced along the beam so you can lock in the exact length needed for the load, with a locking pin holding the setting under load.

In buildings where crane hook travel is already limited, every inch of headroom the beam saves is an inch you get back in usable lift height.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

With a quick pin adjustment, the Machining & Welding 10 FT - 15 FT Low Hr Adj Length is set for the next job in less time than it takes to swap a fixed beam.

Product Info:
•  Working Load Limit: 60,000 lbs
•  Adjustable Length Range: 10 ft to 15 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 2389 lbs