The Machining & Welding 25 FT-30 FT Low He Adj Length solves two problems at once, low headroom and variable load length, adjusting between 25 and 30 feet at a 60,000 pound working load limit.

This design suits facilities with low overhead clearance, such as buildings with low bar joists or crane hooks that sit close to the load, where a standard fixed beam would eat into your usable lift height.

Lifting lugs or shackle points are positioned to keep the rigging geometry efficient across the entire adjustable range of the beam.

In buildings where crane hook travel is already limited, every inch of headroom the beam saves is an inch you get back in usable lift height.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

The Machining & Welding 25 FT-30 FT Low He Adj Length is ready to go to work anywhere headroom is tight and load length is not always the same.

Product Info:
•  Working Load Limit: 60,000 lbs
•  Adjustable Length Range: 25 ft to 30 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 5783 lbs