For loads that do not fit a fixed-length beam, the Machining & Welding 15 FT - 20 FT Low Hr Adj Length adjusts from 15 to 20 feet while keeping a low profile, all within a 2,000 pound rating.

This beam is a good fit for maintenance and fabrication work where load sizes change from job to job but hook height above the floor stays limited.

Lifting lugs or shackle points are positioned to keep the rigging geometry efficient across the entire adjustable range of the beam.

Keeping the sling angle close to vertical protects both the load and the rigging, and an adjustable length beam makes that easier across varying load sizes.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding 15 FT - 20 FT Low Hr Adj Length to your rigging inventory and stop turning away lifts that do not fit a fixed-length beam.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Adjustable Length Range: 15 ft to 20 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 575 lbs