Lifting Beams

When ceiling clearance is limited, the Machining & Welding 3 FT - 5 FT Low Hr Adj Length keeps your rigging profile low while still adjusting from 3 to 5 feet, rated to 20,000 pounds. This design...

The Machining & Welding 3 FT - 5 FT Low Hr Adj Length solves two problems at once, low headroom and variable load length, adjusting between 3 and 5 feet at a 4,000 pound working load limit. This beam...

When ceiling clearance is limited, the Machining & Welding 3 FT - 5 FT Low Hr Adj Length keeps your rigging profile low while still adjusting from 3 to 5 feet, rated to 40,000 pounds. This design...

For loads that do not fit a fixed-length beam, the Machining & Welding 3 FT - 5 FT Low Hr Adj Length adjusts from 3 to 5 feet while keeping a low profile, all within a 6,000 pound rating. Riggers...

The Machining & Welding 3 FT - 5 FT Low Hr Adj Length solves two problems at once, low headroom and variable load length, adjusting between 3 and 5 feet at a 60,000 pound working load limit. This...

For loads that do not fit a fixed-length beam, the Machining & Welding 3 FT - 5 FT Low Hr Adj Length adjusts from 3 to 5 feet while keeping a low profile, all within a 80,000 pound rating. This beam...

The Machining & Welding 3/4 IN 1250 LB Long Reach Foundry is a long reach foundry hook built from 3/4 inch alloy steel, rated to 1,250 pounds. This hook's extended reach makes it easier to hook and...

Built for foundry and heavy industrial rigging, the Machining & Welding 3/4 IN 1400 LB Short Reach Foundry offers a 6 inch reach at 1,400 pounds capacity. The added hook reach gives clearance around...

The Machining & Welding 3/4 IN Teacup Ferrule Fitting gives you a 3/4 inch wire rope termination shaped to seat into a concrete pipe bell. This fitting swages onto wire rope to create the teacup...

When you need a dependable spreader beam for routine lifts, the Machining & Welding 30000 LB 10 FT Standard Lift Beam delivers 10 feet of length at 30,000 pounds capacity. The swivel hook connections...

The Machining & Welding 30000 LB 12 FT Standard Lift Beam is a fixed length, general purpose lift beam built for everyday overhead lifting. At 12 feet long, it carries a 30,000 pound working load...

Built for demanding lifting schedules, the Machining & Welding 30000 LB 120 IN-144 IN Adjustable Lift adjusts between 120 and 144 inches while holding a 30,000 pound working load limit. Because the...