For loads that do not fit a fixed-length beam, the Machining & Welding 3 FT - 5 FT Low Hr Adj Length adjusts from 3 to 5 feet while keeping a low profile, all within a 80,000 pound rating.

This beam is a good fit for maintenance and fabrication work where load sizes change from job to job but hook height above the floor stays limited.

The steel construction is engineered to hold the full working load limit at any length setting within the adjustable range, not only when fully extended or retracted.

In buildings where crane hook travel is already limited, every inch of headroom the beam saves is an inch you get back in usable lift height.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The specifications below cover everything you need to check compatibility with your equipment.

Order the Machining & Welding 3 FT - 5 FT Low Hr Adj Length for a beam that adjusts to the load instead of asking the load to fit the beam.

Product Info:
•  Working Load Limit: 80,000 lbs
•  Adjustable Length Range: 3 ft to 5 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 1443 lbs