For loads that do not fit a fixed-length beam, the Machining & Welding 25 FT-30 FT Low Hr Adj Length adjusts from 25 to 30 feet while keeping a low profile, all within a 80,000 pound rating.

Riggers commonly use this style of beam for spreading sling angles on long or awkward loads while keeping the total headroom used by the rigging as small as possible.

Adjustment holes are spaced along the beam so you can lock in the exact length needed for the load, with a locking pin holding the setting under load.

Adjustability reduces the rigging inventory you need to keep on hand, since one beam covers a range of load lengths instead of just one.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The specifications below cover everything you need to check compatibility with your equipment.

The Machining & Welding 25 FT-30 FT Low Hr Adj Length keeps your options open on both load length and overhead clearance, in a single piece of equipment.

Product Info:
•  Working Load Limit: 80,000 lbs
•  Adjustable Length Range: 25 ft to 30 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 6570 lbs