For loads that do not fit a fixed-length beam, the Machining & Welding 15 FT - 20 FT Low Hr Adj Length adjusts from 15 to 20 feet while keeping a low profile, all within a 80,000 pound rating.

This beam is a good fit for maintenance and fabrication work where load sizes change from job to job but hook height above the floor stays limited.

The steel construction is engineered to hold the full working load limit at any length setting within the adjustable range, not only when fully extended or retracted.

A low headroom, adjustable length beam gives you the flexibility of several fixed-length beams in a single piece of equipment.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Add the Machining & Welding 15 FT - 20 FT Low Hr Adj Length to your rigging inventory and stop turning away lifts that do not fit a fixed-length beam.

Product Info:
•  Working Load Limit: 80,000 lbs
•  Adjustable Length Range: 15 ft to 20 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 3761 lbs