The Machining & Welding 20 FT-25 FT Low Hr Adj Length is built for lifts where headroom is tight and load length varies. It adjusts across a 20 to 25 foot range and carries a 80,000 pound working load limit.

The adjustable length lets one beam handle pallets, crates, machinery, or panels of different sizes instead of stocking a separate fixed-length beam for every load dimension.

Adjustment holes are spaced along the beam so you can lock in the exact length needed for the load, with a locking pin holding the setting under load.

In buildings where crane hook travel is already limited, every inch of headroom the beam saves is an inch you get back in usable lift height.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 20 FT-25 FT Low Hr Adj Length for a beam that adjusts to the load instead of asking the load to fit the beam.

Product Info:
•  Working Load Limit: 80,000 lbs
•  Adjustable Length Range: 20 ft to 25 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 5255 lbs