When ceiling clearance is limited, the Machining & Welding 3 FT - 5 FT Low Hr Adj Length keeps your rigging profile low while still adjusting from 3 to 5 feet, rated to 40,000 pounds.

This design suits facilities with low overhead clearance, such as buildings with low bar joists or crane hooks that sit close to the load, where a standard fixed beam would eat into your usable lift height.

Lifting lugs or shackle points are positioned to keep the rigging geometry efficient across the entire adjustable range of the beam.

A low headroom, adjustable length beam gives you the flexibility of several fixed-length beams in a single piece of equipment.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 3 FT - 5 FT Low Hr Adj Length for a beam that adjusts to the load instead of asking the load to fit the beam.

Product Info:
•  Working Load Limit: 40,000 lbs
•  Adjustable Length Range: 3 ft to 5 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 706 lbs