For loads that do not fit a fixed-length beam, the Machining & Welding 15 FT - 20 FT Low Hr Adj Length adjusts from 15 to 20 feet while keeping a low profile, all within a 40,000 pound rating.

Because the length adjusts, you can match the beam to the actual pick points on the load, which keeps sling angles closer to vertical and reduces stress on the rigging.

Adjustment holes are spaced along the beam so you can lock in the exact length needed for the load, with a locking pin holding the setting under load.

This style of beam is a common upgrade for shops that outgrew a fixed-length spreader bar and kept running into loads it did not fit.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

With a quick pin adjustment, the Machining & Welding 15 FT - 20 FT Low Hr Adj Length is set for the next job in less time than it takes to swap a fixed beam.

Product Info:
•  Working Load Limit: 40,000 lbs
•  Adjustable Length Range: 15 ft to 20 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 2643 lbs