The Machining & Welding 10 FT - 15 FT Low Hr Adj Length is a low headroom lift beam that telescopes or pins out between 10 and 15 feet, giving you a 40,000 pound working load limit across a range of load lengths.

Riggers commonly use this style of beam for spreading sling angles on long or awkward loads while keeping the total headroom used by the rigging as small as possible.

Adjustment holes are spaced along the beam so you can lock in the exact length needed for the load, with a locking pin holding the setting under load.

In buildings where crane hook travel is already limited, every inch of headroom the beam saves is an inch you get back in usable lift height.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 10 FT - 15 FT Low Hr Adj Length for a beam that adjusts to the load instead of asking the load to fit the beam.

Product Info:
•  Working Load Limit: 40,000 lbs
•  Adjustable Length Range: 10 ft to 15 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 2098 lbs