The Machining & Welding 25 FT-30 FT Low He Adj Length solves two problems at once, low headroom and variable load length, adjusting between 25 and 30 feet at a 40,000 pound working load limit.

Riggers commonly use this style of beam for spreading sling angles on long or awkward loads while keeping the total headroom used by the rigging as small as possible.

Lifting lugs or shackle points are positioned to keep the rigging geometry efficient across the entire adjustable range of the beam.

In buildings where crane hook travel is already limited, every inch of headroom the beam saves is an inch you get back in usable lift height.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

With a quick pin adjustment, the Machining & Welding 25 FT-30 FT Low He Adj Length is set for the next job in less time than it takes to swap a fixed beam.

Product Info:
•  Working Load Limit: 40,000 lbs
•  Adjustable Length Range: 25 ft to 30 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 3880 lbs