For loads that do not fit a fixed-length beam, the Machining & Welding 3 FT - 5 FT Low Hr Adj Length adjusts from 3 to 5 feet while keeping a low profile, all within a 6,000 pound rating.

Riggers commonly use this style of beam for spreading sling angles on long or awkward loads while keeping the total headroom used by the rigging as small as possible.

The steel construction is engineered to hold the full working load limit at any length setting within the adjustable range, not only when fully extended or retracted.

In buildings where crane hook travel is already limited, every inch of headroom the beam saves is an inch you get back in usable lift height.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding 3 FT - 5 FT Low Hr Adj Length is ready to go to work anywhere headroom is tight and load length is not always the same.

Product Info:
•  Working Load Limit: 6,000 lbs
•  Adjustable Length Range: 3 ft to 5 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 217 lbs