When ceiling clearance is limited, the Machining & Welding 3 FT - 5 FT Low Hr Adj Length keeps your rigging profile low while still adjusting from 3 to 5 feet, rated to 20,000 pounds.

This design suits facilities with low overhead clearance, such as buildings with low bar joists or crane hooks that sit close to the load, where a standard fixed beam would eat into your usable lift height.

Adjustment holes are spaced along the beam so you can lock in the exact length needed for the load, with a locking pin holding the setting under load.

In buildings where crane hook travel is already limited, every inch of headroom the beam saves is an inch you get back in usable lift height.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The specifications below cover everything you need to check compatibility with your equipment.

Add the Machining & Welding 3 FT - 5 FT Low Hr Adj Length to your rigging inventory and stop turning away lifts that do not fit a fixed-length beam.

Product Info:
•  Working Load Limit: 20,000 lbs
•  Adjustable Length Range: 3 ft to 5 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 348 lbs