When ceiling clearance is limited, the Machining & Welding 15 FT - 20 FT Low Hr Adj Length keeps your rigging profile low while still adjusting from 15 to 20 feet, rated to 20,000 pounds.

Because the length adjusts, you can match the beam to the actual pick points on the load, which keeps sling angles closer to vertical and reduces stress on the rigging.

A low profile steel body keeps the beam thickness minimal, preserving as much usable hook height as possible in low clearance areas.

Adjustability reduces the rigging inventory you need to keep on hand, since one beam covers a range of load lengths instead of just one.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

The specifications below cover everything you need to check compatibility with your equipment.

The Machining & Welding 15 FT - 20 FT Low Hr Adj Length is ready to go to work anywhere headroom is tight and load length is not always the same.

Product Info:
•  Working Load Limit: 20,000 lbs
•  Adjustable Length Range: 15 ft to 20 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 2055 lbs