The Machining & Welding 5/8 IN 2-Leg Wr Bridle is a 2-leg wire rope bridle sling built from 5/8 inch wire rope.

Multi-leg bridles like this connect to lift points on a load and gather at a single master link, letting a crane or hoist pick the load from multiple points at once.

Each leg is fabricated from wire rope with swaged or mechanically spliced end fittings, gathered at a master link rated to match the assembly.

A properly sized bridle keeps tension balanced across all legs, which protects both the load and the rigging.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

Order the Machining & Welding 5/8 IN 2-Leg Wr Bridle for a 2-leg bridle built from 5/8 inch wire rope.

Product Info:
•  Working Load Limit: 11,000 lbs
•  Wire Rope Diameter: 5/8 in
•  Legs: 2
•  Connection: 11,000 LB WLL AT 45 DEG
•  Shipping Weight: See product tag