The Machining & Welding 5/8 IN 2-Leg Wr Bridle is a 2-leg wire rope bridle sling built from 5/8 inch wire rope.

Multi-leg bridles like this connect to lift points on a load and gather at a single master link, letting a crane or hoist pick the load from multiple points at once.

Each leg is fabricated from wire rope with swaged or mechanically spliced end fittings, gathered at a master link rated to match the assembly.

Wire rope bridles are a go-to choice when a load needs to be picked from more than two points and durability matters more than sling weight.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding 5/8 IN 2-Leg Wr Bridle is ready to rig your next multi-point lift.

Product Info:
•  Working Load Limit: 11,000 lbs
•  Wire Rope Diameter: 5/8 in
•  Legs: 2
•  Connection: 11,000 LB WLL AT 45 DEG
•  Shipping Weight: See product tag