Built from 5/8 inch wire rope, the Machining & Welding 5/8 IN 2-Leg Wr Bridle gives you a 2-leg bridle for multi-point lifts.

This bridle is built for loads with multiple lift points, keeping tension distributed evenly across each leg during the pick.

Each leg is fabricated from wire rope with swaged or mechanically spliced end fittings, gathered at a master link rated to match the assembly.

For heavy structural and equipment rigging, wire rope holds up to repeated use and rough handling better than many alternatives.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding 5/8 IN 2-Leg Wr Bridle to your rigging kit for dependable, multi-leg wire rope lifting.

Product Info:
•  Working Load Limit: 11,000 lbs
•  Wire Rope Diameter: 5/8 in
•  Legs: 2
•  Connection: 11,000 LB WLL AT 45 DEG
•  Shipping Weight: See product tag