Built from 7/8 inch wire rope, the Machining & Welding 7/8 IN 2-Leg Wr Bridle gives you a 2-leg bridle for multi-point lifts.

Multi-leg bridles like this connect to lift points on a load and gather at a single master link, letting a crane or hoist pick the load from multiple points at once.

Each leg is fabricated from wire rope with swaged or mechanically spliced end fittings, gathered at a master link rated to match the assembly.

A properly sized bridle keeps tension balanced across all legs, which protects both the load and the rigging.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

See the specifications below for the exact numbers you will want to check before ordering.

The Machining & Welding 7/8 IN 2-Leg Wr Bridle is ready to rig your next multi-point lift.

Product Info:
•  Working Load Limit: 22,000 lbs
•  Wire Rope Diameter: 7/8 in
•  Legs: 2
•  Connection: 22,000 LB WLL AT 45 DEG
•  Shipping Weight: See product tag