Built as a Style A design, the Machining & Welding 5000 LB Style A Mat Stand carries a 5,000 pound working load limit at 29 inches tall.

Mat stands like this support rig mats and other heavy panels off the ground, keeping them accessible for crews without stacking directly on bare ground.

A rigid steel frame keeps the stand stable under load, whether supporting a single mat or a stacked set.

An organized mat storage system speeds up loading and staging when mats need to go out to the next job.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding 5000 LB Style A Mat Stand is ready to keep your mats organized and off the ground.

Product Info:
•  Capacity: 5,000 lbs
•  Style: A
•  Height: 29 in
•  Width: 42 in
•  Shipping Weight: 173 lbs