Built as a Style C design, the Machining & Welding 5000 LB Style C Mat Stand carries a 5,000 pound working load limit at 24 inches tall.

This stand supports mats during storage or staging between jobs, keeping the storage yard organized and mats off wet or uneven ground.

A rigid steel frame keeps the stand stable under load, whether supporting a single mat or a stacked set.

Keeping mats off the ground protects them from moisture and debris that can shorten their service life.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

See the specifications below for the exact numbers you will want to check before ordering.

The Machining & Welding 5000 LB Style C Mat Stand is ready to keep your mats organized and off the ground.

Product Info:
•  Capacity: 5,000 lbs
•  Style: C
•  Height: 24 in
•  Width: 47.5 in
•  Shipping Weight: 110 lbs