The Machining & Welding 10000 LB Style A Mat Stand is a Style A mat stand rated to 10,000 pounds, standing 25 inches tall and 47.5 inches wide.

Mat stands like this support rig mats and other heavy panels off the ground, keeping them accessible for crews without stacking directly on bare ground.

The stand is fabricated from structural steel, engineered to hold its rated capacity while supporting mats at a stable working height.

Keeping mats off the ground protects them from moisture and debris that can shorten their service life.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

The Machining & Welding 10000 LB Style A Mat Stand is ready to keep your mats organized and off the ground.

Product Info:
•  Capacity: 10,000 lbs
•  Style: A
•  Height: 25 in
•  Width: 47.5 in
•  Shipping Weight: 130 lbs