The Machining & Welding 1-1/4 IN 2-Leg Wr Bridle is a 2-leg wire rope bridle sling built from 1-1/4 inch wire rope.

This bridle is built for loads with multiple lift points, keeping tension distributed evenly across each leg during the pick.

Wire rope construction throughout gives the bridle strength and durability, with end fittings engineered to hold the rated capacity of each leg.

A properly sized bridle keeps tension balanced across all legs, which protects both the load and the rigging.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

Add the Machining & Welding 1-1/4 IN 2-Leg Wr Bridle to your rigging kit for dependable, multi-leg wire rope lifting.

Product Info:
•  Working Load Limit: 42,000 lbs
•  Wire Rope Diameter: 1-1/4 in
•  Legs: 2
•  Connection: 42,000 LB WLL AT 45 DEG
•  Shipping Weight: See product tag