Built from 1-1/4 inch wire rope, the Machining & Welding 1-1/4 IN 2-Leg Wr Bridle gives you a 2-leg bridle for multi-point lifts.

Multi-leg bridles like this connect to lift points on a load and gather at a single master link, letting a crane or hoist pick the load from multiple points at once.

Each leg is fabricated from wire rope with swaged or mechanically spliced end fittings, gathered at a master link rated to match the assembly.

For heavy structural and equipment rigging, wire rope holds up to repeated use and rough handling better than many alternatives.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding 1-1/4 IN 2-Leg Wr Bridle is ready to rig your next multi-point lift.

Product Info:
•  Working Load Limit: 42,000 lbs
•  Wire Rope Diameter: 1-1/4 in
•  Legs: 2
•  Connection: 42,000 LB WLL AT 45 DEG
•  Shipping Weight: See product tag