Built from 1-1/4 inch wire rope, the Machining & Welding 1-1/4 IN 2-Leg Wr Bridle gives you a 2-leg bridle for multi-point lifts.

Wire rope construction holds up to abrasion and outdoor exposure better than synthetic slings, which makes this bridle a common choice for structural steel and heavy equipment rigging.

The bridle assembly is built to industry rigging standards, with consistent leg length and fitting quality across the set.

A properly sized bridle keeps tension balanced across all legs, which protects both the load and the rigging.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 1-1/4 IN 2-Leg Wr Bridle for a 2-leg bridle built from 1-1/4 inch wire rope.

Product Info:
•  Working Load Limit: 42,000 lbs
•  Wire Rope Diameter: 1-1/4 in
•  Legs: 2
•  Connection: 42,000 LB WLL AT 45 DEG
•  Shipping Weight: See product tag