Built from 1/2 inch wire rope, the Machining & Welding 1/2 IN 2-Leg Wr Bridle gives you a 2-leg bridle for multi-point lifts.

Wire rope construction holds up to abrasion and outdoor exposure better than synthetic slings, which makes this bridle a common choice for structural steel and heavy equipment rigging.

Each leg is fabricated from wire rope with swaged or mechanically spliced end fittings, gathered at a master link rated to match the assembly.

For heavy structural and equipment rigging, wire rope holds up to repeated use and rough handling better than many alternatives.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The specifications below cover everything you need to check compatibility with your equipment.

The Machining & Welding 1/2 IN 2-Leg Wr Bridle is ready to rig your next multi-point lift.

Product Info:
•  Working Load Limit: 7,200 lbs
•  Wire Rope Diameter: 1/2 in
•  Legs: 2
•  Connection: 7,200 LB WLL AT 45 DEG
•  Shipping Weight: See product tag