The Machining & Welding 1/2 IN 2-Leg Wr Bridle is sized at 1/2 inches of wire rope across 2 legs, built for demanding rigging jobs.

Multi-leg bridles like this connect to lift points on a load and gather at a single master link, letting a crane or hoist pick the load from multiple points at once.

Wire rope construction throughout gives the bridle strength and durability, with end fittings engineered to hold the rated capacity of each leg.

Wire rope bridles are a go-to choice when a load needs to be picked from more than two points and durability matters more than sling weight.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The specifications below cover everything you need to check compatibility with your equipment.

Order the Machining & Welding 1/2 IN 2-Leg Wr Bridle for a 2-leg bridle built from 1/2 inch wire rope.

Product Info:
•  Working Load Limit: 7,200 lbs
•  Wire Rope Diameter: 1/2 in
•  Legs: 2
•  Connection: 7,200 LB WLL AT 45 DEG
•  Shipping Weight: See product tag