Main Frame Pawl Shaft “ SKU: 670 The Precision Pivot Pin That Anchors Load-Holding on Lug-All's Most Powerful Hoist When 6,000 lbs of load depends on a pawl staying exactly in position, the shaft that mounts that pawl cannot be left to chance. The Main Frame Pawl Shaft (SKU: 670) is the genuine OEM replacement shaft that secures the main frame pawl in the main frame casting of the Lug-All model 6000-15 ” the largest-frame, highest-capacity come-along hoist Lug-All builds. This main frame pawl shaft is compatible with Lug-All model 6000-15 only. J Harlen Co. The Lug-All model 6000-15 is a heavy-duty, industrial-grade 3-ton cable come along hoist ” delivering 3,000 lbs in single line with 15 feet of cable, or 6,000 lbs in double line with 7 feet 6 inches of cable. ShoreLandr Per the official 6000-15SH parts list, the main frame pawl shaft (Part #670) is listed immediately after the main frame pawl (Part #669) at reference position #42 ” confirming the shaft is the direct mounting component for the pawl within the main frame casting. The shaft passes through the main frame and the pawl bore, establishing the pivot axis around which the pawl rotates to engage and disengage the drum's ratchet teeth. The main frame pawl spring (Part #200) keeps constant tension on the pawl against the shaft, ensuring the pawl stays in contact with the drum face between strokes. J Harlen Co. The 6000-15 features a double locking pawl system ” one of two interlocking pawls is always engaged, so no load brakes can slip or fail, providing positive load-holding in all environments. The main frame pawl shaft is what holds the main frame pawl ” one half of that critical double-interlocking system ” in precise rotational alignment within the frame bore. A worn, corroded, bent, or undersized shaft introduces radial play into the pawl assembly. This creates inconsistent tooth engagement, audible ratchet skip under load, and in severe cases, pawl escape from the ratchet profile entirely ” a direct safety failure on a hoist operating at 3-ton capacity. Lug-All The 6000-15 pawl shaft is a model-specific component ” it differs in diameter and length from pawl shafts used on Lug-All's small, medium, and lightweight frame models, which must not be substituted. Only the OEM SKU 670 shaft provides the exact bore-to-shaft clearance and hardness specification required for reliable pawl function at full rated capacity. Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number670Part NameMain Frame Pawl ShaftCompatible ModelLug-All #6000-15 onlyHoist Type3-Ton Cable Ratchet Winch HoistHoist Capacity (Single Line)3,000 lbsHoist Capacity (Double Line)6,000 lbsSecuresMain Frame Pawl (#669)Works WithMain Frame Pawl Spring (#200)Component CategoryMain Frame / Pawl Pivot ShaftCountry of OriginUSA

Model Exclusivity Note The SKU 670 main frame pawl shaft is exclusive to the 6000-15. It is not interchangeable with main frame pawl shafts for any other Lug-All model. When servicing the pawl system, consider replacing the pawl and spring together using the complete kit (SKU: 669-K) for maximum maintenance efficiency. Order SKU 670 today and maintain precise, reliable main frame pawl engagement on your Lug-All 6000-15.