Main Frame Pawl Shaft “ SKU: 635 The Precision Pin That Anchors Load-Holding on Your Lug-All Hot Stick Hoists Every stroke you make on a Lug-All web strap hoist depends on one thing above all: the main frame pawl staying firmly in position and engaging the drum's ratchet teeth with perfect reliability. The component that makes that possible is the main frame pawl shaft ” and the Main Frame Pawl Shaft (SKU: 635) is the genuine OEM replacement shaft engineered specifically for Lug-All's hot stick -B series small frame hoists. This main frame pawl shaft is compatible with Lug-All hoist models 25-B and 2-B exclusively. Lug-All

25-B ” Industrial-grade 1½-ton hot stick web strap hoist: 1,500 lbs single line / 3,000 lbs double line, 8 ft strap, equipped with hot-stick rings for electrical lineman work. Lug-All 2-B ” Industrial-grade 1-ton hot stick web strap hoist: 1,000 lbs single line / 2,000 lbs double line, 10 ft strap, equipped with hot-stick rings for electrical lineman work. Lug-All

The main frame pawl shaft is the structural pivot pin that mounts the main frame pawl within the cast aluminum main frame housing. When installing the main frame pawl, the shaft is inserted through the pawl and into the main frame, securing the assembly in place so the pawl can engage the drum's ratchet teeth consistently on every stroke. Under both single and double line loads, the main frame pawl ” held in perfect alignment by this shaft ” is one half of Lug-All's double interlocking pawl system that guarantees positive load-holding in all environments. Lug-All Lug-All's double interlocking pawl mechanism ensures that no load brakes will slip or fail, delivering positive load-holding in all environments. That guarantee depends entirely on a dimensionally correct, properly seated main frame pawl shaft. A worn, bent, or undersized shaft introduces play into the pawl assembly, causes inconsistent ratchet engagement, and can result in the pawl failing to fully seat against the drum teeth under load ” a serious safety hazard on any hoist, but especially on a hot stick model used near energized power lines. eBay The SKU 635 is a hot stick model-specific part. It is not interchangeable with the main frame pawl shaft for the standard 25-A and 2-A models (Part #127), which differ in the frame geometry of their -A series housings. Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number635Part NameMain Frame Pawl ShaftCompatible ModelsLug-All #25-B, #2-BHoist TypeSmall Frame Web Strap Ratchet Winch Hoist (Hot Stick)Model 2-B Capacity1,000 lbs (single) / 2,000 lbs (double)Model 25-B Capacity1,500 lbs (single) / 3,000 lbs (double)Component CategoryMain Frame / Pawl SystemCountry of OriginUSA

Important Ordering Note The SKU 635 is exclusively for models 25-B and 2-B. It is not compatible with the standard -A versions of these models (25-A, 2-A), which use Part #127. Always verify your model number ” found on the ratchet side of the drum ” before ordering. Order SKU 635 today and restore the full load-holding integrity of your Lug-All hot stick hoist.