U-Frame Pawl “ SKU: 679 The Active Drive Component That Advances the Drum on Every Handle Stroke In a double interlocking pawl system, there are two pawls ” and they serve different roles. The main frame pawl holds the load statically between strokes. The U-frame pawl is the active drive component: it engages the ratchet teeth and advances the drum forward with every stroke of the handle. The U-Frame Pawl (SKU: 679) is the genuine OEM replacement drive pawl for the Lug-All model 6000-15 ” the large-frame component that converts handle motion into controlled cable movement at up to 6,000 lbs of load. Per the official 6000-15SH parts list, the U-frame pawl (Part #679) is listed at reference position #14, mounted within the U-frame assembly alongside the U-frame pawl shaft (#680), spring support roll (#683), reverse lever (#681), retaining washer (#682), shaft snap washers (#671), and U-frame pawl spring (#195). Lug-All The Lug-All model 6000-15 is a heavy-duty, industrial-grade 3-ton cable come along hoist ” delivering 3,000 lbs in single line with 15 feet of cable, or 6,000 lbs in double line with 7 feet 6 inches of cable. Lug-All To lower a load, the reverse lever holds the U-frame pawl away from the ratchet teeth, allowing the drum to rotate in the releasing direction ” confirming that the U-frame pawl's default engaged position is held by the pawl spring, keeping it in constant contact with the drum face during all lifting and holding operations. When the reverse lever is released, the U-frame pawl spring drives the pawl back against the drum, re-engaging the ratchet teeth for the next lifting stroke. The EHP Group The 6000-15's double interlocking pawl mechanism ensures that one pawl is always holding the load ” and the U-frame pawl is the more mechanically active of the two, cycling through engagement and disengagement on every single handle stroke. This repetitive engagement under load stress makes the U-frame pawl one of the highest-wear components in the hoist. A pawl with a rounded or chipped engagement face skips teeth, produces audible ratchet slipping, and reduces effective load control ” signs that replacement is immediately necessary. Rigging Warehouse Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number679Part NameU-Frame PawlCompatible ModelLug-All #6000-15 onlyParts List ReferencePosition #14 (6000-15SH parts list)Hoist Type3-Ton Cable Ratchet Winch HoistHoist Capacity (Single Line)3,000 lbsHoist Capacity (Double Line)6,000 lbsWorks WithU-Frame Pawl Spring #195, Pawl Shaft #680Component CategoryU-Frame / Drive PawlCountry of OriginUSA

Model Exclusivity Note The SKU 679 U-Frame Pawl is exclusive to the 6000-15 large-frame model. It is not interchangeable with U-frame pawls for other Lug-All cable hoist models. When replacing the U-frame pawl, inspect the U-frame pawl spring (SKU: 195) and U-frame pawl shaft (SKU: 680) at the same time and replace as needed. Order SKU 679 today and restore precise, consistent ratchet drive to your Lug-All 6000-15 at full 3-ton capacity.