SKU: 803-RED | Pulley Block Assembly ” Compatible with Lug-All Models 3000-10, 3000-10i, 3000-15, 3000-30, and 330-R (1-1/2-Ton Cable Hoists) Restore Full Double-Line Capacity Across Five 1-1/2-Ton Cable Hoists ” One OEM Part Whether you need your hoist to reach farther in single-line configuration or lift heavier in double-line mode, a properly functioning pulley block assembly is essential to unlocking your cable hoist's full rated potential. The SKU 803-RED Pulley Block Assembly is a genuine OEM replacement component covering five of Lug-All's 1-1/2-ton cable hoist models: the model 3000-10, with 10 feet of cable at 1,500 lbs single-line or 5 feet at 3,000 lbs double-line; the model 3000-15, with 15 feet of cable at 1,500 lbs single-line or 7 feet 6 inches at 3,000 lbs double-line; the model 3000-30, with 30 feet of cable at 1,500 lbs single-line or 15 feet at 3,000 lbs double-line; the model 3000-10i, sharing the same cable and capacity specifications as the 3000-10; and the model 330-R, a 1-1/2-ton cable hoist with rapid lowering capability that allows the hoist to lower four times faster than other models, with 30 feet at 1,500 lbs single-line or 15 feet at 3,000 lbs double-line. All five models share the same cable specification and pulley block assembly requirement, making SKU 803-RED the correct single-part replacement across this entire 1-1/2-ton family. Lug-All + 3 In double-line operation, the cable routes from the drum, loops through the pulley block assembly, and returns to the fixed anchor point ” creating the mechanical advantage that doubles the hoist's effective lifting and pulling capacity. The pulley block must rotate freely under full load throughout every ratcheting cycle, maintaining smooth cable travel and even load distribution across both cable legs. When the pulley wheel seizes, the block housing cracks, or the assembly hook is deformed, cable movement becomes uneven and the full double-line capacity of the hoist becomes unreliable and potentially unsafe to apply. All Lug-All cable hoists are made in the USA using 7x19 aircraft cable and are designed with an aluminum alloy main frame with open construction for easy cleaning and maintenance. The SKU 803-RED pulley block assembly is manufactured to the precise specifications required for the 7/32" aircraft cable used across the 1-1/2-ton model family ” ensuring the cable seats correctly in the pulley groove and runs cleanly without binding or edge wear at full double-line load. The RED color designation is Lug-All's capacity-class identifier for the 1-1/2-ton family, confirming this assembly is matched to the correct capacity class when ordering. Lug-All Lug-All's double interlocking pawl mechanism ensures that one pawl is always holding the load ” a critical load-holding safety feature that works in tandem with a properly functioning pulley block to maintain controlled, stable load management in every double-line lifting and pulling application. Lug-All cable hoists also include a handle designed to bend at 125 to 150 percent of the rated capacity, protecting the user and equipment ” completing a safety system that depends on all components, including the pulley block assembly, being in correct working condition. Joseph Fazzio, Inc.Lug-All Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU803-REDPart NamePulley Block AssemblyColor DesignationRed (1-1/2-ton model identifier)Compatible ModelsLug-All 3000-10, 3000-10i, 3000-15, 3000-30, and 330-RHoist TypeCable Come-Along / Ratchet Winch Hoist3000-10 / 3000-10i1,500 lbs / 10 FT single; 3,000 lbs / 5 FT double3000-151,500 lbs / 15 FT single; 3,000 lbs / 7.5 FT double3000-301,500 lbs / 30 FT single; 3,000 lbs / 15 FT double330-R1,500 lbs / 30 FT single; 3,000 lbs / 15 FT double330-R Special FeatureRapid Lowering (4x faster descent)Cable Type7x19 Aircraft CableCable Diameter7/32 inchPart TypeComplete OEM Replacement AssemblyCountry of ManufactureUSA

One Part Number ” Five Compatible 1-1/2-Ton Models The broad compatibility of SKU 803-RED across five 1-1/2-ton cable hoist models makes it a highly efficient stocking part for maintenance teams operating multiple hoists in this capacity class. Rather than managing separate pulley block part numbers for each model, a single RED assembly covers your entire 1-1/2-ton cable hoist fleet. Regular maintenance and inspection of hoist parts are essential for ensuring safe and efficient operation, and addressing wear or malfunctions promptly contributes to the longevity and reliability of the hoist system. Keep one on the shelf and your 1-1/2-ton cable hoists are never sidelined by a pulley block failure. BH-USA This pulley block assembly is compatible with Lug-All models 3000-10, 3000-10i, 3000-15, 3000-30, and 330-R only. Always verify the color designation matches your hoist's capacity class before ordering. Please confirm your model number before purchasing.