The Machining & Welding Tri-Cho Wire Mesh Sling 10X3 FT is a complete wire mesh sling assembly rated to 12,000 pounds, built 10 feet wide by 3 feet long with a triangle to choker configuration.

The mesh fabric conforms to the load's shape, spreading contact pressure across a wider area than a chain or wire rope sling would.

End fittings are rated to match the mesh body, so the complete assembly carries a consistent working load limit from end to end.

Wire mesh handles heat and rough surfaces that would cut or melt a synthetic sling, which matters in foundry, forging, and scrap handling work.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

See the specifications below for the exact numbers you will want to check before ordering.

The Machining & Welding Tri-Cho Wire Mesh Sling 10X3 FT is ready to rig for your next coil, casting, or rough stock lift.

Product Info:
•  Working Load Limit: 12,000 lbs
•  Configuration: Triangle to Choker
•  Width: 10 ft
•  Length: 3 ft
•  Shipping Weight: 28 lbs