Sidebar Sidebar Sidebar
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    FREE in house engineering and design assistance

  • Wordwide Delivery

    Free shipping on all Harrington orders over 500LBS

Machining & Welding Tri-Cho Wire Mesh Sling 10X6 ft, 12,000 lbs WLL Vertical & Choker

Write a Review
$1,114.97
$836.23
(You save $278.74 )
SKU: WMTC10-6
Weight: 47.20 LBS
Shipping: Calculated at Checkout
Working Load Limit: 12,000 lbs
Configuration: Triangle to Choker
Width: 10 ft
Length: 6 ft
Adding to cart… The item has been added
Machining & Welding Tri-Cho Wire Mesh Sling 10X6 ft, 12,000 lbs WLL Vertical & Choker

Machining & Welding Tri-Cho Wire Mesh Sling 10X6 ft, 12,000 lbs WLL Vertical & Choker

$1,114.97
$836.23
(You save $278.74 )

Built as a 10 by 6 foot triangle to choker assembly, the Machining & Welding Tri-Cho Wire Mesh Sling 10X6 FT carries a 12,000 pound working load limit.

This sling can be rigged as a straight vertical lift or as a choker hitch, giving you two ways to secure a load with the same piece of equipment.

The sling body is woven from galvanized steel wire mesh, with triangle or choker end fittings sized to match the rated capacity of the assembly.

The conforming mesh body reduces point-loading on delicate or irregular stock compared to rigid chain or rigid hook connections.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding Tri-Cho Wire Mesh Sling 10X6 FT is ready to rig for your next coil, casting, or rough stock lift.


Product Info:
•  Working Load Limit: 12,000 lbs
•  Configuration: Triangle to Choker
•  Width: 10 ft
•  Length: 6 ft
•  Shipping Weight: 47.2 lbs

For full warranty terms, visit www.machiningandwelding.com or call their hotline.

Customers Also Viewed