The Machining & Welding Spreader Beam End Cap Pair is a replacement end cap pair for modular spreader beam sections.

This hardware connects the top rigging chain or wire rope to the modular spreader section, transferring the lift load into the beam.

Steel construction and a secure fit keep this hardware matched to standard modular spreader beam sections.

Keeping a spare on hand means a damaged connection point does not take a whole spreader section out of service.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

Order the Machining & Welding Spreader Beam End Cap Pair to match your existing modular spreader hardware.

Product Info:
•  Style: End Cap Pair
•  Minimum Top Rigging Angle: 45 degrees
•  Shipping Weight: 28 lbs