For workbenches, machine cells, and assembly stations, the Machining & Welding Cantilever Jib Crane 18 FT Span delivers a 18 foot span of rotating coverage rated to 2,000 pounds, so operators can swing loads in and out without walking a bridge crane across the building.

Because the boom swings freely, operators can pull a load away from a machine and set it down nearby in one continuous motion, cutting cycle time compared to a straight-line hoist.

A reinforced base plate anchors the mast, while the boom is engineered to carry the working load limit at any point along its span, not just close to the mast.

A dedicated jib crane frees up your bridge crane or forklift for other tasks by handling the repetitive lifts at one station on its own.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding Cantilever Jib Crane 18 FT Span is ready to mount a hoist and start handling the same lift, in the same spot, day after day.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Boom Span: 18 ft
•  Style: Cantilever, rotating mast
•  Frame Material: Structural steel
•  Shipping Weight: 1895 lbs