The Machining & Welding Adjustable Height Gantry Crane 9-12 FT is a freestanding, height adjustable gantry crane designed for shops and yards that need lifting capability without a permanent overhead runway. With a 9 to 12 foot height range and a 10,000 pound working load limit, it adapts to a wide range of lift heights on demand.

With a 10 foot span, you can position the crane over engine bays, machinery, crates, or work cells and run a hoist or trolley along the beam to move loads side to side as well as up and down.

Heavy gauge steel construction and a pin-adjustable leg system let you change the working height in the field, and the whole unit breaks down for storage or transport.

A portable gantry crane like this one is a practical choice when ceiling height, building structure, or budget rule out a fixed bridge crane installation.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Add the Machining & Welding Adjustable Height Gantry Crane 9-12 FT to your fleet and you get a crane that rolls to the job instead of tying up floor space with a permanent structure.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Adjustable Height Range: 9 ft to 12 ft
•  Beam Span: 10 ft
•  Frame Material: Structural steel
•  Mobility: Casters for shop and yard positioning
•  Shipping Weight: 1661 lbs