When your job site needs a crane that goes where a fixed structure cannot, the Machining & Welding Adjustable Height Gantry Crane 9-12 FT steps in. Built with an adjustable height range of 9 to 12 feet and a working load limit of 6,000 pounds, this gantry crane gives you a portable, self contained lifting solution you can roll into position and set up in minutes.

With a 10 foot span, you can position the crane over engine bays, machinery, crates, or work cells and run a hoist or trolley along the beam to move loads side to side as well as up and down.

The welded steel beam and adjustable legs are engineered to hold the rated capacity at any height setting within the range, not just at the extremes.

A portable gantry crane like this one is a practical choice when ceiling height, building structure, or budget rule out a fixed bridge crane installation.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

When the next lift shows up in a different corner of the shop, the Machining & Welding Adjustable Height Gantry Crane 9-12 FT is already built to follow it there.

Product Info:
•  Working Load Limit: 6,000 lbs
•  Adjustable Height Range: 9 ft to 12 ft
•  Beam Span: 10 ft
•  Frame Material: Structural steel
•  Mobility: Casters for shop and yard positioning
•  Shipping Weight: 1095 lbs