The Machining & Welding Adjustable Height Gantry Crane 9-12 FT puts a 6,000 pound capacity overhead lift directly where you need it, with a height range that adjusts from 9 to 12 feet. Instead of committing to a fixed hoist location, you move this gantry crane to the load.

At 20 feet of span, the crane comfortably clears most vehicles, tanks, and machine bases, giving you room to lift and shift loads without repositioning the entire gantry.

The frame is fabricated from structural steel with a bolted, adjustable leg design, so you can raise or lower the beam height without cutting or re-welding anything.

This design gives small and mid-size shops crane-level lifting capability without the engineering and installation work that a fixed overhead system requires.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

The Machining & Welding Adjustable Height Gantry Crane 9-12 FT is ready to receive a hoist and go to work as soon as it arrives, no site engineering or building modifications required.

Product Info:
•  Working Load Limit: 6,000 lbs
•  Adjustable Height Range: 9 ft to 12 ft
•  Beam Span: 20 ft
•  Frame Material: Structural steel
•  Mobility: Casters for shop and yard positioning
•  Shipping Weight: 1740 lbs