When your job site needs a crane that goes where a fixed structure cannot, the Machining & Welding Adjustable Height Gantry Crane 12-15 FT steps in. Built with an adjustable height range of 12 to 15 feet and a working load limit of 10,000 pounds, this gantry crane gives you a portable, self contained lifting solution you can roll into position and set up in minutes.

With 10 feet between legs, the crane is sized to work over a single bay or workstation, making it a practical fit for shops that need on demand overhead lifting in one dedicated spot.

Heavy gauge steel construction and a pin-adjustable leg system let you change the working height in the field, and the whole unit breaks down for storage or transport.

Choosing a height adjustable gantry crane instead of a fixed jib or overhead runway means you get one piece of equipment that serves multiple work areas and lift heights.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

See the specifications below for the exact numbers you will want to check before ordering.

With setup this simple, the Machining & Welding Adjustable Height Gantry Crane 12-15 FT earns its keep the first time a job calls for overhead lifting somewhere your fixed crane cannot reach.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Adjustable Height Range: 12 ft to 15 ft
•  Beam Span: 10 ft
•  Frame Material: Structural steel
•  Mobility: Casters for shop and yard positioning
•  Shipping Weight: 1792 lbs