When ceiling clearance is limited, the Machining & Welding 5 FT - 10 FT Low Hr Adj Length keeps your rigging profile low while still adjusting from 5 to 10 feet, rated to 40,000 pounds.

This design suits facilities with low overhead clearance, such as buildings with low bar joists or crane hooks that sit close to the load, where a standard fixed beam would eat into your usable lift height.

Adjustment holes are spaced along the beam so you can lock in the exact length needed for the load, with a locking pin holding the setting under load.

A low headroom, adjustable length beam gives you the flexibility of several fixed-length beams in a single piece of equipment.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

Order the Machining & Welding 5 FT - 10 FT Low Hr Adj Length for a beam that adjusts to the load instead of asking the load to fit the beam.

Product Info:
•  Working Load Limit: 40,000 lbs
•  Adjustable Length Range: 5 ft to 10 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 1574 lbs