When ceiling clearance is limited, the Machining & Welding 5 FT - 10 FT Low Hr Adj Length keeps your rigging profile low while still adjusting from 5 to 10 feet, rated to 4,000 pounds.

Riggers commonly use this style of beam for spreading sling angles on long or awkward loads while keeping the total headroom used by the rigging as small as possible.

A low profile steel body keeps the beam thickness minimal, preserving as much usable hook height as possible in low clearance areas.

Keeping the sling angle close to vertical protects both the load and the rigging, and an adjustable length beam makes that easier across varying load sizes.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

The Machining & Welding 5 FT - 10 FT Low Hr Adj Length keeps your options open on both load length and overhead clearance, in a single piece of equipment.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Adjustable Length Range: 5 ft to 10 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 346 lbs