For loads that do not fit a fixed-length beam, the Machining & Welding 5 FT - 10 FT Low Hr Adj Length adjusts from 5 to 10 feet while keeping a low profile, all within a 15,000 pound rating.

The adjustable length lets one beam handle pallets, crates, machinery, or panels of different sizes instead of stocking a separate fixed-length beam for every load dimension.

Adjustment holes are spaced along the beam so you can lock in the exact length needed for the load, with a locking pin holding the setting under load.

Adjustability reduces the rigging inventory you need to keep on hand, since one beam covers a range of load lengths instead of just one.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

Add the Machining & Welding 5 FT - 10 FT Low Hr Adj Length to your rigging inventory and stop turning away lifts that do not fit a fixed-length beam.

Product Info:
•  Working Load Limit: 15,000 lbs
•  Adjustable Length Range: 5 ft to 10 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 810 lbs