When ceiling clearance is limited, the Machining & Welding 15 FT - 20 FT Low Hr Adj Length keeps your rigging profile low while still adjusting from 15 to 20 feet, rated to 15,000 pounds.

Because the length adjusts, you can match the beam to the actual pick points on the load, which keeps sling angles closer to vertical and reduces stress on the rigging.

A low profile steel body keeps the beam thickness minimal, preserving as much usable hook height as possible in low clearance areas.

Keeping the sling angle close to vertical protects both the load and the rigging, and an adjustable length beam makes that easier across varying load sizes.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding 15 FT - 20 FT Low Hr Adj Length to your rigging inventory and stop turning away lifts that do not fit a fixed-length beam.

Product Info:
•  Working Load Limit: 15,000 lbs
•  Adjustable Length Range: 15 ft to 20 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 1577 lbs