The Machining & Welding 20 FT-25 FT Low Hr Adj Length is built for lifts where headroom is tight and load length varies. It adjusts across a 20 to 25 foot range and carries a 15,000 pound working load limit.

Because the length adjusts, you can match the beam to the actual pick points on the load, which keeps sling angles closer to vertical and reduces stress on the rigging.

Lifting lugs or shackle points are positioned to keep the rigging geometry efficient across the entire adjustable range of the beam.

This style of beam is a common upgrade for shops that outgrew a fixed-length spreader bar and kept running into loads it did not fit.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

Add the Machining & Welding 20 FT-25 FT Low Hr Adj Length to your rigging inventory and stop turning away lifts that do not fit a fixed-length beam.

Product Info:
•  Working Load Limit: 15,000 lbs
•  Adjustable Length Range: 20 ft to 25 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 2489 lbs