The Machining & Welding 10000 LB 30 FT Fixed Spreader Beam spreads your rigging across 30 feet, rated to 10,000 pounds.

Swivel hook connections at each end let you attach chain or wire rope slings quickly, keeping load angles controlled during the pick.

The beam is fabricated from structural steel with swivel hook connections, engineered to hold the full rated capacity across its length.

Spreading the rigging with a beam like this reduces sling angle stress compared to picking directly from a single hook.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 10000 LB 30 FT Fixed Spreader Beam for a straightforward 30 foot spreader beam rated to 10,000 pounds.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Beam Length: 30 ft
•  Connection: SWIVEL HOOK CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 690 lbs