The Machining & Welding 10000 LB 12 FT Fixed Spreader Beam is a fixed length spreader beam rated to 10,000 pounds at 12 feet.

A fixed length beam like this is a straightforward choice for recurring lifts where the load dimensions do not change from one job to the next.

As a fixed length design, there is no adjustment mechanism to inspect, just a solid steel beam ready to rig.

Spreading the rigging with a beam like this reduces sling angle stress compared to picking directly from a single hook.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding 10000 LB 12 FT Fixed Spreader Beam is ready to spread your rigging and keep the next lift level.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Beam Length: 12 ft
•  Connection: SWIVEL HOOK CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 195 lbs