The Machining & Welding 10 FT - 15 FT Low Hr Adj Length solves two problems at once, low headroom and variable load length, adjusting between 10 and 15 feet at a 10,000 pound working load limit.

This design suits facilities with low overhead clearance, such as buildings with low bar joists or crane hooks that sit close to the load, where a standard fixed beam would eat into your usable lift height.

Lifting lugs or shackle points are positioned to keep the rigging geometry efficient across the entire adjustable range of the beam.

Keeping the sling angle close to vertical protects both the load and the rigging, and an adjustable length beam makes that easier across varying load sizes.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

See the specifications below for the exact numbers you will want to check before ordering.

With a quick pin adjustment, the Machining & Welding 10 FT - 15 FT Low Hr Adj Length is set for the next job in less time than it takes to swap a fixed beam.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Adjustable Length Range: 10 ft to 15 ft
•  Profile: Low headroom design
•  Frame Material: Structural steel
•  Shipping Weight: 1123 lbs